- 1. Ltd. is a company specializing in the production of imported rubber wood finger-board of the company.
- 佛山洋槐木业有限公司 洋槐木业有限公司是一家专业生产进口橡胶木拼板、指接板的公司。
mupi.31wood.com
- 2. PP thick board, waterproof, and prevent dirt, two big-size lever arch chip, vast capacity, round finger hole is designed to fetch and set more conveniently.
- PP厚板，防水防污，大两孔荷兰夹，超大容量，插指孔设计，取放两便。
www.hfs-fj.com
- 3. The result showed that the bond strength and immersion strength of adhesive bond of the laminated finger-joint board are higher, but shearing strength is lower.
- 结果表明，这种杉木有高胶接强度和浸渍剥离强度，但自身剪切强度较低。
dict.cnki.net
- 4. I plant specializing in the production of a variety of Scotch Pine finger-board, Glulam, Wang puzzle.
- 我厂专业生产各种规格的樟子松指接板、集成材、横拼板。
danci.911cha.com
- 5. A special advantage of this method lies in the possibility of adjusting the finger-board to the selected strings and to the individual technique of the player.
- 这个方法特别好处在在调整指板的可能性对选择的串和对球员的单独技术。
bbs.guitarcn.com
- 6. If there are still some dust blobs, unclip the ribbon connectors with your finger-nail and remove the board (four screws). You can then spray out the whole optical block.
- 如果仍然有灰尘，用你的指甲把排线拔掉然后把主板移走（有四颗螺丝）。你可以接着喷整个光学部件。
hd199.com
- 7. In order to improve the intonation, however, the finger-board needs to be exchanged or the frets re-positioned.
- 为了改进语调，然而，指板需要被交换或苦恼被改变位置。
bbs.guitarcn.com
- 8. Milling cutter with a right-turn blade edge is designed for board sides requiring high precision. It is suitable for PCB golden-finger surface processing and precision board edge trimming.
- 右旋刀刃螺纹状铣刀，针对板边要求高精密细度而设计，适用于PCB金手指端面加工及精度高之板材修边加工。
save.datingattractivenakedteachers.com
- 9. Milling cutter with a right-turn blade edge is designed for board sides requiring high precision. It is suitable for PCB golden-finger surface processing and precision board edge trimming.
- 右旋刀刃螺纹状铣刀，针对板边要求高精密细度而设计，适用于PCB金手指端面加工及精度高之板材修边加工。
save.datingattractivenakedteachers.com
